33-99No. Mufu E Rd. Gulou District, Nanjing, China [email protected] | [email protected]

ENEN

Get in touch

Rammer

Home /  Products /  Hydraulic Hammer/Breaker /  Rammer

All

4099E Hydraulic Hammer Seal Kits

4099E Hydraulic Hammer Seal Kits

Inquiry
  • Overview
  • Inquiry
  • Related Products
4099E Hydraulic Hammer Seal Kits
4099E Hydraulic Hammer Seal Kits
4099E Hydraulic Hammer Seal Kits
4099E Hydraulic Hammer Seal Kits
4099E Hydraulic Hammer Seal Kits
4099E Hydraulic Hammer Seal Kits
4099E Hydraulic Hammer Seal Kits
4099E Hydraulic Hammer Seal Kits
4099E Hydraulic Hammer Seal Kits
4099E Hydraulic Hammer Seal Kits

FEATURES

Item

Specification

Series

Large Range Excellence

Application Scenarios

Primary demolition, Trenching, Secondary demolition, Primary breaking, Secondary breaking, Underwater breaking

Min. working weight (flange mounted)

    3,380 kg (7,450 lb)

Oil flow range

   250-350 L/min (66-93 Gal/min)

Tool diameter

166 mm (7 in)  

arrier equipment applicable weight range

36-55 t

Operating pressure

 150-180 bar

Impact frequency (Long stroke)

 320-580 bpm

4099E Breaker Seal Kit Components

4099E Hydraulic Hammer Seal Kits details

Additional Notes

  • Ensure the 166mm tool is locked in place during installation; use original accessories and operate in accordance with specifications when replacing the lower tool bushing. Inspect the tightness of the idle blow protector and high-pressure diaphragm accumulator before each operation. Conduct a comprehensive inspection of waterproof components before underwater operation to prevent water ingress and corrosion of the internal hydraulic system.
  • Strictly abide by the minimum flange-mounted working weight requirement of 3380kg, and strictly prohibit no-load dry firing even with the idle blow protector installed. Control the impact frequency within the rated range of 320-580bpm and avoid long-term high-intensity continuous breaking operations. Stop the machine immediately and troubleshoot faults through the RD3 remote monitoring system if abnormal noise or vibration occurs during operation.
  • Track the equipment's operating data by virtue of the RD3 remote monitoring system and complete maintenance on a regular basis. Inspect the pressure value of the high-pressure diaphragm accumulator periodically, replenish nitrogen in a timely manner and check for leakage; unauthorized disassembly and adjustment are strictly prohibited. Clean the hammer body and hydraulic interfaces after operation, conduct wear detection on vulnerable parts such as the tool and bushing, and replace them immediately if the wear exceeds the standard. Perform rust-proof treatment and seal the hydraulic ports when the equipment is out of service for a long time.

GET IN TOUCH

Email Address *
Name*
Phone Number*
Company Name*
Message *

Welcome to HOVOO, a Chinese seal factory. Production of PU, Rubber and PTFE seals. The seals include O-ring, piston seal, rod seal, Gray ring and gas seal.

Product

Portfolio

Footer
Footer

Copyright © Nanjing Hovoo Machinery Technology Co., Ltd All Rights Reserved