33-99No. Mufu E Rd. Gulou District, Nanjing, China [email protected] | [email protected]

Get in touch

EDDIE

Home /  Products /  Hydraulic Hammer/Breaker /  EDDIE

EDDIE200-2 Hydraulic Hammer Seal Kits

EDDIE200-2 Hydraulic Hammer Seal Kits

  • Overview
  • Inquiry
  • Related Products

FEATURES

Item

Specification

 Hydraulic Oil Pressure

 270-300kg/cm²

3837-4263psi

265-294bar

Hydraulic Oil Flow Rate

 260-315l/min

69-83gal/min

Impact Frequency

 100-150bpm

Chisel Diameter 

200mm

7.87inch

Applicable Carrier Weight

48-60ton    

Main Valve Type

External

Accumulator

Equipped

EDDIE200-2 Breaker Seal Kit Components

eddie200 2 hydraulic hammer seal kits-2

Additional Notes

  • Strictly control pressure (265–294 bar) and flow (260–315 l/min). Over-pressure/over-flow is prohibited to avoid overload damage to external main valve, accumulator and seal failure.
  • Suitable for 48–60 ton excavators, installed by professionals. Fully bleed air from pipelines; set accumulator nitrogen pressure per factory standard, no unauthorized adjustment.
  • Impact frequency: 100–150 bpm. Prolonged idling, eccentric striking, and continuous heavy blows on hard rock are prohibited to prevent chisel breakage and abnormal cylinder wear.
  • Regularly check hydraulic oil cleanliness, accumulator pressure and seals. For long-term storage: release pressure, anti-rust treatment, keep dry and ventilated.

 

GET IN TOUCH

Email Address *
Name*
Phone Number*
Company Name*
Message *