33-99No. Mufu E Rd. Gulou District, Nanjing, China [email protected] | [email protected]

Get in touch

Rammer

Home /  Products /  Hydraulic Hammer/Breaker /  Rammer

E04 Hydraulic Hammer Seal Kits

E04 Hydraulic Hammer Seal Kits

  • Overview
  • Inquiry
  • Related Products

FEATURES

Item

Specification

Series

Compact Range

Applicable Scenarios

Primary demolition, Trenching, Secondary demolition, Recycling, Cutting of asphalt or frozen ground, Landscaping, Ground compacting, Underwater breaking  

Min. working weight (flange mounted)

150 kg (331 lb)   

Oil flow range

 20-62 L/min (5-16 gal/min)

Tool diameter

60 mm (2 in)  

Skid steer/robot weight range

1-4 t (- lb)  

Miniexcavator weight range

  2-6 t (- lb)

Operating pressure

120-160 bar

Max back pressure

30 bar (435 psi)

Input power

 17 kW (22 hp)

Impact rate (frequency)

600 bpm

Max pressure relief

220 bar

Suitable carrier weight range

1.2-6.0 t

E04 Breaker Seal Kit Components

E04 Hydraulic Hammer Seal Kits manufacture

Additional Notes

  • Install in a clean, debris-free environment and avoid scratching the seal surface. Replace all seals in the kit at one time and never mix old and new ones; apply a thin layer of compatible hydraulic oil to seals during installation to ensure tight sealing and prevent premature failure.
  • Abide by the 150 kg minimum flange-mounted working weight and 120-160 bar operating pressure range. Strictly prohibit dry firing and long-term continuous impact on the same position to avoid overheating, piston/cylinder damage and irreversible failure of the hammer body.
  • Store the E04 hammer and its seal kit in a cool, dry and dark place, away from direct sunlight, high temperature and corrosive substances. Check the integrity of seals and hydraulic components before each use; if cracks, deformation or aging are found, replace them in time to ensure operational safety.

GET IN TOUCH

Email Address *
Name*
Phone Number*
Company Name*
Message *