33-99No. Mufu E Rd. Gulou District, Nanjing, China [email protected] | [email protected]

ENEN

Get in touch

EDDIE

Home /  Products /  Hydraulic Hammer/Breaker /  EDDIE

All

EDDIE100A Hydraulic Hammer Seal Kits

EDDIE100A Hydraulic Hammer Seal Kits

Inquiry
  • Overview
  • Inquiry
  • Related Products
EDDIE100A Hydraulic Hammer Seal Kits
EDDIE100A Hydraulic Hammer Seal Kits
EDDIE100A Hydraulic Hammer Seal Kits
EDDIE100A Hydraulic Hammer Seal Kits
EDDIE100A Hydraulic Hammer Seal Kits
EDDIE100A Hydraulic Hammer Seal Kits
EDDIE100A Hydraulic Hammer Seal Kits
EDDIE100A Hydraulic Hammer Seal Kits
EDDIE100A Hydraulic Hammer Seal Kits
EDDIE100A Hydraulic Hammer Seal Kits

FEATURES

Item

Specification

 Hydraulic Oil Pressure

 150-170kg/cm²

2130-2414psi

147-166bar

Hydraulic Oil Flow Rate

 80-110l/min

21-29gal/min

Impact Frequency

 350-700bpm

Chisel Diameter 

100mm

3.94inch

Applicable Carrier Weight

10-15ton    

Main Valve Type

Built-in

Accumulator

 None

EDDIE100A Breaker Seal Kit Components

eddie100a hydraulic hammer seal kits-2

Additional Notes

  • Strictly  match the hydraulic system within the parameter range: Hydraulic oil pressure must be stabilized at 147-166 bar (150-170 kg/cm²), and flow rate controlled at 80-110 L/min. Overpressure/overflow will cause abnormal wear and even direct damage to core components such as the main valve, accumulator, and chisel; insufficient pressure/flow will result in reduced impact force and a significant drop in work efficiency.
  • The applicable excavator weight must be strictly controlled within the range of 10-15 tons. Excessive weight will cause overload and structural cracking of the breaker, while insufficient weight will fail to provide sufficient operational stability and affect the breaking effect.
  • The main valve is of built-in structure. Installation of hydraulic pipeline connection must be performed by professional personnel. Do not disassemble the main valve assembly or accumulator without authorization to avoid hydraulic oil leakage, valve core jamming, or accumulator failure. During commissioning, first evacuate air from the pipeline, then gradually increase the pressure to the rated range.
  • The inclusion of an accumulator requires proper pre-charging (refer to the manufacturer's manual for gas pressure settings) before initial operation to ensure optimal performance of the hydraulic system.

GET IN TOUCH

Email Address *
Name*
Phone Number*
Company Name*
Message *

Welcome to HOVOO, a Chinese seal factory. Production of PU, Rubber and PTFE seals. The seals include O-ring, piston seal, rod seal, Gray ring and gas seal.

Product

Portfolio

Footer
Footer

Copyright © Nanjing Hovoo Machinery Technology Co., Ltd All Rights Reserved