33-99No. Mufu E Rd. Gulou District, Nanjing, China [email protected] | [email protected]

ENEN

Get in touch

Rammer

Home /  Products /  Hydraulic Hammer/Breaker /  Rammer

All

E01 Hydraulic Hammer Seal Kits

E01 Hydraulic Hammer Seal Kits

Inquiry
  • Overview
  • Inquiry
  • Related Products
E01 Hydraulic Hammer Seal Kits
E01 Hydraulic Hammer Seal Kits
E01 Hydraulic Hammer Seal Kits
E01 Hydraulic Hammer Seal Kits
E01 Hydraulic Hammer Seal Kits
E01 Hydraulic Hammer Seal Kits
E01 Hydraulic Hammer Seal Kits
E01 Hydraulic Hammer Seal Kits
E01 Hydraulic Hammer Seal Kits
E01 Hydraulic Hammer Seal Kits

FEATURES

Item

Specification

Series

Compact Range

Applicable Scenarios

Primary demolition, Trenching, Secondary demolition, Recycling, Cutting of asphalt or frozen ground, Landscaping, Ground compacting, Underwater breaking

Min. working weight (flange mounted)

50 kg (110 lb)  

Oil flow range

 10 - 31 L/min (3 - 8 gal/min)

Tool diameter

 40 mm (2 in)  

Skid steer/robot weight range

 0 - 2 t (900 - lb)

Miniexcavator weight range

1 - 3 t (- lb)  

E01 Breaker Seal Kit Components

E01 Hydraulic Hammer Seal Kits manufacture

Additional Notes

  • Before installation, confirm that carrier equipment (skid steer, robot, miniexcavator) matches E01’s exact specifications: oil flow (10-31 L/min), tool diameter (40 mm), and weight range (0-2 t for skid steer/robot, 1-3 t for miniexcavator). Deviations cause unstable operation, seal damage, or reduced hammer life.
  • Install in a clean, debris-free environment. Apply a thin layer of compatible hydraulic oil to seals during assembly to prevent tearing. Never mix old and new seals; replace all components in the seal kit simultaneously to ensure optimal performance.
  • Adhere to the 50 kg (110 lb) minimum flange-mounted working weight requirement. Avoid dry firing (no-load operation) and prolonged continuous use in one spot to prevent overheating and piston/cylinder wear. Monitor oil temperature closely during extended operation.
  • Store the E01 hammer and seal kit in a cool, dry, dark area away from direct sunlight, extreme heat, and corrosive substances. Prevent seal hardening or deformation by avoiding long-term storage. Inspect seals for cracks or damage before installation to avoid premature failure.

GET IN TOUCH

Email Address *
Name*
Phone Number*
Company Name*
Message *

Welcome to HOVOO, a Chinese seal factory. Production of PU, Rubber and PTFE seals. The seals include O-ring, piston seal, rod seal, Gray ring and gas seal.

Product

Portfolio

Footer
Footer

Copyright © Nanjing Hovoo Machinery Technology Co., Ltd All Rights Reserved