33-99No. Mufu E Rd. Gulou District, Nanjing, China [email protected] | [email protected]

ENEN

Get in touch

EDDIE

Home /  Products /  Hydraulic Hammer/Breaker /  EDDIE

All

EDDIE155 Hydraulic Hammer Seal Kits

EDDIE155 Hydraulic Hammer Seal Kits

Inquiry
  • Overview
  • Inquiry
  • Related Products
EDDIE155 Hydraulic Hammer Seal Kits
EDDIE155 Hydraulic Hammer Seal Kits
EDDIE155 Hydraulic Hammer Seal Kits
EDDIE155 Hydraulic Hammer Seal Kits
EDDIE155 Hydraulic Hammer Seal Kits
EDDIE155 Hydraulic Hammer Seal Kits
EDDIE155 Hydraulic Hammer Seal Kits
EDDIE155 Hydraulic Hammer Seal Kits
EDDIE155 Hydraulic Hammer Seal Kits
EDDIE155 Hydraulic Hammer Seal Kits

FEATURES

Item

Specification

 Hydraulic Oil Pressure

 160-180kg/cm²

2272-2556psi

157-177bar

Hydraulic Oil Flow Rate

 180-240l/min

48-64gal/min

Impact Frequency

 300-450bpm

Chisel Diameter 

155mm

6.1inch

Applicable Carrier Weight

28-35ton    

Main Valve Type

  Built-in

Accumulator

Equipped

EDDIE155 Breaker Seal Kit Components

eddie155 hydraulic hammer seal kits-2

Additional Notes

  • Strictly match the hydraulic system within the parameter range: Hydraulic oil pressure must be stabilized at 157-177 bar (160-180 kg/cm²), and flow rate controlled at 180-240 L/min. Over pressure/overflow will cause abnormal wear and even direct damage to core components such as the main valve, accumulator, and chisel; insufficient pressure/flow will result in reduced impact force and a significant drop in work efficiency.
  • The applicable excavator weight must be strictly controlled within the range of 28-35 tons. Excessive weight will cause overload and structural cracking of the breaker, while insufficient weight will fail to provide sufficient operational stability and affect the breaking effect.
  • The main valve is of built-in structure. Installation of hydraulic pipeline connection must be performed by professional personnel. Do not disassemble the main valve assembly or accumulator without authorization to avoid hydraulic oil leakage, valve core jamming, or accumulator failure. During commissioning, first evacuate air from the pipeline, then gradually increase the pressure to the rated range.
  • The inclusion of an accumulator requires proper pre-charging (refer to the manufacturer's manual for gas pressure settings) before initial operation to ensure optimal performance of the hydraulic system.

GET IN TOUCH

Email Address *
Name*
Phone Number*
Company Name*
Message *

Welcome to HOVOO, a Chinese seal factory. Production of PU, Rubber and PTFE seals. The seals include O-ring, piston seal, rod seal, Gray ring and gas seal.

Product

Portfolio

Footer
Footer

Copyright © Nanjing Hovoo Machinery Technology Co., Ltd All Rights Reserved