33-99No. Mufu E Rd. Gulou District, Nanjing, China [email protected] | [email protected]

Get in touch

EDDIE

Home /  Products /  Hydraulic Hammer/Breaker /  EDDIE

EDDIE195-2 Hydraulic Hammer Seal Kits

EDDIE195-2 Hydraulic Hammer Seal Kits

  • Overview
  • Inquiry
  • Related Products

FEATURES

Item

Specification

 Hydraulic Oil Pressure

 260-300kg/cm²

3695-4263psi

255-294bar

Hydraulic Oil Flow Rate

 250-310l/min

66-82gal/min

Impact Frequency

 100-150bpm

Chisel Diameter 

195mm

7.68inch

Applicable Carrier Weight

50-60ton    

Main Valve Type

External

Accumulator

Equipped

EDDIE195-2 Breaker Seal Kit Components

eddie195 2 hydraulic hammer seal kits-2

Additional Notes

  • Strictly control pressure (255–294 bar) and flow (250–310 l/min). Over-pressure/over-flow is prohibited to avoid overload damage to external main valve, accumulator and seal failure.
  • Suitable for 50–60 ton excavators, installed by professionals. Fully bleed air from pipelines; set accumulator nitrogen pressure per factory standard, no unauthorized adjustment.
  • Impact frequency: 100–150 bpm. Prolonged idling, eccentric striking, and continuous heavy blows on hard rock are prohibited to prevent chisel breakage and abnormal cylinder wear.
  • Regularly check hydraulic oil cleanliness, accumulator pressure and seals. For long-term storage: release pressure, anti-rust treatment, keep dry and ventilated.

GET IN TOUCH

Email Address *
Name*
Phone Number*
Company Name*
Message *