33-99No. Mufu E Rd. Gulou District, Nanjing, China [email protected] | [email protected]

ENEN

Get in touch

EDDIE

Home /  Products /  Hydraulic Hammer/Breaker /  EDDIE

All

EDDIE430 Hydraulic Hammer Seal Kits

EDDIE430 Hydraulic Hammer Seal Kits

Inquiry
  • Overview
  • Inquiry
  • Related Products
EDDIE430 Hydraulic Hammer Seal Kits
EDDIE430 Hydraulic Hammer Seal Kits
EDDIE430 Hydraulic Hammer Seal Kits
EDDIE430 Hydraulic Hammer Seal Kits
EDDIE430 Hydraulic Hammer Seal Kits
EDDIE430 Hydraulic Hammer Seal Kits
EDDIE430 Hydraulic Hammer Seal Kits
EDDIE430 Hydraulic Hammer Seal Kits
EDDIE430 Hydraulic Hammer Seal Kits
EDDIE430 Hydraulic Hammer Seal Kits

FEATURES

Item

Specification

 Hydraulic Oil Pressure

 120-150kg/cm²

1702-2133psi

118-147bar

Hydraulic Oil Flow Rate

 50-90l/min

13-24gal/min

Impact Frequency

 400-800bpm

Chisel Diameter 

75mm

2.95inch

Applicable Carrier Weight

6-9ton    

Main Valve Type

Built-in

Accumulator

 None

EDDIE430 Breaker Seal Kit Components

eddie430 hydraulic hammer seal kits-2

Additional Notes

  • Strictly match the hydraulic system within the parameter range: Hydraulic oil pressure must be stabilized at 118-147 bar (120-150 kg/cm²), and flow rate controlled at 50-90 L/min. Over pressure/overflow will cause abnormal wear and even direct damage to core components such as the main valve and chisel; insufficient pressure/flow will result in reduced impact force and a significant drop in work efficiency.
  • The applicable excavator weight must be strictly controlled within the range of 6-9 tons. Excessive weight will cause overload and structural cracking of the breaker, while insufficient weight will fail to provide sufficient operational stability and affect the breaking effect.
  • The main valve is of built-in structure. Installation of hydraulic pipeline connection must be performed by professional personnel. Do not disassemble the main valve assembly without authorization to avoid hydraulic oil leakage, valve core jamming and other faults. During commissioning, first evacuate air from the pipeline, then gradually increase the pressure to the rated range.
  • This model has no accumulator design. Extra attention must be paid to the impact buffering of the hydraulic system during operation. Avoid long-term continuous high-frequency striking to prevent excessive hydraulic oil temperature and intensified pipeline vibration, which will affect the service life of the equipment.

GET IN TOUCH

Email Address *
Name*
Phone Number*
Company Name*
Message *

Welcome to HOVOO, a Chinese seal factory. Production of PU, Rubber and PTFE seals. The seals include O-ring, piston seal, rod seal, Gray ring and gas seal.

Product

Portfolio

Footer
Footer

Copyright © Nanjing Hovoo Machinery Technology Co., Ltd All Rights Reserved