33-99No. Mufu E Rd. Gulou District, Nanjing, China [email protected] | [email protected]

ENEN

Get in touch

Montabert

Home /  Products /  Hydraulic Hammer/Breaker /  Montabert

All

SD16 Hydraulic Breaker Seal Kits

SD16 Hydraulic Breaker Seal Kits

Inquiry
  • Overview
  • Inquiry
  • Related Products
SD16 Hydraulic Breaker Seal Kits
SD16 Hydraulic Breaker Seal Kits
SD16 Hydraulic Breaker Seal Kits
SD16 Hydraulic Breaker Seal Kits
SD16 Hydraulic Breaker Seal Kits
SD16 Hydraulic Breaker Seal Kits
SD16 Hydraulic Breaker Seal Kits
SD16 Hydraulic Breaker Seal Kits
SD16 Hydraulic Breaker Seal Kits
SD16 Hydraulic Breaker Seal Kits

FEATURES

Item

Specification

Operating Weight (Carrier Weight)

   131 kg

Weight with Adapter Plate

  194 kg  

Minimum Oil Flow

25 L/min

Maximum Oil Flow

50 L/min

SD16Breaker Seal Kit Components

sd16 hydraulic breaker seal kits-2

Additional Notes

  • Ensure   the carrier's hydraulic flow is strictly within the 25-50 L/min rated range. Excessive flow will cause rapid overheating of the internal valve train and cylinder, leading to seal failure; insufficient flow will result in weak impact energy, reduced breaking efficiency, and increased idling wear.
  • Prior to operation, verify that the adapter plate is properly positioned and all fastening bolts are tightened to the specified torque. The 194 kg total weight with the plate demands high installation rigidity; loose components can cause severe structural resonance and accidental detachment during high-intensity work.
  • Never actuate the breaker when the tool bit is not fully attached to the working surface. No-load striking imposes extreme stress on the piston, tool shank, and front head, which can cause plastic deformation of key parts and drastically shorten the service life.
  • Thoroughly clean the breaker body and tool to remove rock debris and dust after each operation. Inspect hydraulic joints for oil seepage and check the tool for wear, bending, or edge cracking. Replace worn or damaged parts immediately to prevent operational accidents and maintain system hygiene.

GET IN TOUCH

Email Address *
Name*
Phone Number*
Company Name*
Message *

Welcome to HOVOO, a Chinese seal factory. Production of PU, Rubber and PTFE seals. The seals include O-ring, piston seal, rod seal, Gray ring and gas seal.

Product

Portfolio

Footer
Footer

Copyright © Nanjing Hovoo Machinery Technology Co., Ltd All Rights Reserved