33-99No. Mufu E Rd. Gulou District, Nanjing, China [email protected] | [email protected]

ENEN

Get in touch

Rammer

Home /  Products /  Hydraulic Hammer/Breaker /  Rammer

All

3288E Hydraulic Hammer Seal Kits

3288E Hydraulic Hammer Seal Kits

Inquiry
  • Overview
  • Inquiry
  • Related Products
3288E Hydraulic Hammer Seal Kits
3288E Hydraulic Hammer Seal Kits
3288E Hydraulic Hammer Seal Kits
3288E Hydraulic Hammer Seal Kits
3288E Hydraulic Hammer Seal Kits
3288E Hydraulic Hammer Seal Kits
3288E Hydraulic Hammer Seal Kits
3288E Hydraulic Hammer Seal Kits
3288E Hydraulic Hammer Seal Kits
3288E Hydraulic Hammer Seal Kits

FEATURES

Item

Specification

Series

Large Range Excellence

Application Scenarios

Primary demolition, Trenching, Secondary demolition, Secondary breaking, Underwater breaking, Primary breaking

Min. working weight (flange mounted)

2,350 kg (5,181 lbs)     

Weight

2,040 kg (4,500 lbs)   

Working length

2,581 mm (101.6 in)  

Oil flow range

160-250 L/min (42.3-66.0 Gal/min)

Operating pressure

150-160 bar (2,175-2,320 psi)

Impact frequency (Long stroke)

 370-630 bpm

Impact frequency (Short stroke)

  460-740 bpm

3288E Breaker Seal Kit Components

3288E Hydraulic Hammer Seal Kits supplier

Additional Notes

  • Ensure the 142 mm tool is firmly installed and VIDAT tie rods are locked to the specified torque. Pre-check the normal operation of the idle blow protector and vibration/sound suppressed structure before each use; for underwater work, verify the sealing integrity of all waterproof components to prevent water ingress and internal part corrosion.
  • Abide by the 2,350 kg minimum flange-mounted working weight requirement, strictly prohibit dry firing even with the idle blow protector. Control impact frequency within the rated range (370-630 bpm for long stroke, 460-740 bpm for short stroke) and avoid long-term continuous high-intensity demolition; stop working immediately if abnormal noise/vibration occurs and check the RD3 remote monitoring data for fault cues.
  • Use the RD3 remote monitoring system to track the hammer’s working status and conduct scheduled maintenance. Regularly inspect the wear of VIDAT tie rods and the tool, replace worn parts in time; clean and maintain the vibration/sound suppressed structure after operation to remove sludge and dust. Keep the pressure relief setting at 220 bar (no arbitrary adjustment to max 240 bar) and replenish dedicated hydraulic oil to ensure the RamValve works stably.

GET IN TOUCH

Email Address *
Name*
Phone Number*
Company Name*
Message *

Welcome to HOVOO, a Chinese seal factory. Production of PU, Rubber and PTFE seals. The seals include O-ring, piston seal, rod seal, Gray ring and gas seal.

Product

Portfolio

Footer
Footer

Copyright © Nanjing Hovoo Machinery Technology Co., Ltd All Rights Reserved