33-99No. Mufu E Rd. Gulou District, Nanjing, China [email protected] | [email protected]

ENEN

Get in touch

EDDIE

Home /  Products /  Hydraulic Hammer/Breaker /  EDDIE

All

EDDIE165 Hydraulic Hammer Seal Kits

EDDIE165 Hydraulic Hammer Seal Kits

Inquiry
  • Overview
  • Inquiry
  • Related Products
EDDIE165 Hydraulic Hammer Seal Kits
EDDIE165 Hydraulic Hammer Seal Kits
EDDIE165 Hydraulic Hammer Seal Kits
EDDIE165 Hydraulic Hammer Seal Kits
EDDIE165 Hydraulic Hammer Seal Kits
EDDIE165 Hydraulic Hammer Seal Kits
EDDIE165 Hydraulic Hammer Seal Kits
EDDIE165 Hydraulic Hammer Seal Kits
EDDIE165 Hydraulic Hammer Seal Kits
EDDIE165 Hydraulic Hammer Seal Kits

FEATURES

Item

Specification

 Hydraulic Oil Pressure

 180-200kg/cm²

2556-2840psi

177-196bar

Hydraulic Oil Flow Rate

 200-250l/min

53-66gal/min

Impact Frequency

 200-380bpm

Chisel Diameter 

165mm

6.5inch

Applicable Carrier Weight

30-40ton    

Main Valve Type

 Built-in

Accumulator

Equipped

EDDIE165 Breaker Seal Kit Components

eddie165 hydraulic hammer seal kits-2

Additional Notes

  • Strictly match the hydraulic system within the parameter range: Hydraulic oil pressure must be stabilized at 177-196 bar (180-200 kg/cm²), and flow rate controlled at 200-250 L/min. Over pressure/overflow will cause abnormal wear and even direct damage to core components such as the main valve, accumulator, and chisel; insufficient pressure/flow will result in reduced impact force and a significant drop in work efficiency.
  • The applicable excavator weight must be strictly controlled within the range of 30-40 tons. Excessive weight will cause overload and structural cracking of the breaker, while insufficient weight will fail to provide sufficient operational stability and affect the breaking effect.
  • The main valve is of built-in structure. Installation of hydraulic pipeline connection must be performed by professional personnel. Do not disassemble the main valve assembly or accumulator without authorization to avoid hydraulic oil leakage, valve core jamming, or accumulator failure. During commissioning, first evacuate air from the pipeline, then gradually increase the pressure to the rated range.
  • The inclusion of an accumulator requires proper pre-charging (refer to the manufacturer's manual for gas pressure settings) before initial operation to ensure optimal performance of the hydraulic system.

 

GET IN TOUCH

Email Address *
Name*
Phone Number*
Company Name*
Message *

Welcome to HOVOO, a Chinese seal factory. Production of PU, Rubber and PTFE seals. The seals include O-ring, piston seal, rod seal, Gray ring and gas seal.

Product

Portfolio

Footer
Footer

Copyright © Nanjing Hovoo Machinery Technology Co., Ltd All Rights Reserved